Xantrex Technology 120 VAC/60 owner manual Setup Menu, Menu Headings

MENU SYSTEM

SETUP MENU

The SETUP MENU provides all the controls and settings needed when installing or adjusting the system. To access the SETUP MENU, press both the red ON/OFF MENU and green GEN MENU buttons at the same time on the control panel of the inverter or remote control. To exit, simply go to one of the USER MENU headings numbers 1 through 8, or press the red ON/OFF MENU or green GEN MENU button once.

MENU HEADINGS

Inverter Setup

9

Use to program and adjust the operation of the inverter. Also allows adjustment of how the inverter/ charger mode uses the utility grid.

Battery Charging

10

Use to adjust the operation of the battery charger.

AC Inputs

11

Use to adjust the operating characteristics of the utility grid (AC1) and the generator (AC2) inputs.

Gen Auto Start

setup12

Use to setup the when the automatic generator control system and the maximum run time allowed

Gen starting

details13

Use to adjust the starting sequence of the automatic generator control system.

Auxiliary Relays
R9 R10 R11	14

Use to adjust the operation of the auxiliary signal relays for controlling external power sources or system loads.

Bulk Charge
Trigger Timer	15

Use to set a time when the battery will be given a bulk charge cycle from the utility grid (AC1) input. Usually only used when SLT mode is enabled.

Low Battery
Transfer (LBX)	16

Use to set up the transfer voltage setting for the LBX mode.

Battery Selling

17

Use to control the SELL mode when it is used to discharge a battery into the utility grid. Also allows setting of the maximum sell amps.

Grid Usage Timer

18

Use to control when the inverter/charger mode uses the utility grid for the FLT and SELL modes.

Information File

battery19

Provides information about the operation of some settings and meters.

End Setup Menu

20

Used to display that you have reached the end of the SETUP MENU.

Page

44

 2001 Xantrex Technology, Inc.	Telephone: 360/435-8826	SW Series Inverter/Charger
5916 - 195th Street N. E.	Fax: 360/435-2229	Part No. 2031-5
Arlington, WA 98223	www.traceengineering.com	Rev. C: February 2001