Xantrex Technology 120 VAC/60 owner manual User Menu, Menu Headings

MENU SYSTEM

USER MENU

The USER MENU provides all the controls and settings needed on a daily basis. It allows you to turn on the inverter and generator, read the AC and DC meters, check on an error cause and even adjust the inverter’s time clock.

MENU HEADINGS

Inverter Mode

1

Allows control of the inverter and enables the search and charger only modes.

Generator Mode

2

Allows control of the generator, enables automatic operation or triggers an equalization charge cycle. This menu heading is used only if a generator is included and controlled by the inverter.

Trace

Engineering 3

Meters

4

Error Causes

5

Time of Day

6

Provides information for accessing Xantrex. Also provides the software revision number and allows resetting to the factory default values.

Allows monitoring of the DC battery voltage, AC voltages and AC current of the inverter and other AC sources.

Provides an indication of the cause of an error condition. Check this menu heading if the red ERROR LED indicator is illuminated on the control panel.

Sets the internal 24-hour clock. This is used for time sensitive operating modes and to determine the “quiet time” period for generator run lockout.

Generator Timer

7

Used to set a run lockout period called “quiet time”. During quiet time, the generator starts only if the battery voltage reaches the LBCO 30 sec start VDC setting.

End User Menu

8

Used to display that you have reached the end of the USER MENU.

Page

36

 2001 Xantrex Technology, Inc.	Telephone: 360/435-8826	SW Series Inverter/Charger
5916 - 195th Street N. E.	Fax: 360/435-2229	Part No. 2031-5
Arlington, WA 98223	www.traceengineering.com	Rev. C: February 2001