Installing the XC Series
Mounting the Remote Display
WARNING: Shock hazard
Even if you intend to leave the remote display in the shipped orientation in the XC Series, you must remove the remote display and secure it in place by removing the
To accommodate the charger mounting orientation, the remote display can be removed and turned 180 ° for readability. If you intend to mount the display remotely, up to 20 m (65 ft), remove the display before mounting the charger and secure the blank plate to cover the display socket on the unit.
CAUTION
Ensure you are placing the display in the correct orientation before removing the adhesive backing. The adhesive tape for attaching the remote is extremely strong and you may be unable to remove it without damaging the display or other equipment.
To remove the display:
1.Unplug the display cable from the
2.Release the display cable from the retaining clips on the underside of the unit.
3.Remove the remote display from the charger and read and then remove the warning label that is attached to it.
To secure the display or blank plate on the unit:
1.Choose the display orientation that is appropriate for the charger orientation.
2.Remove the adhesive backing on the back of the display or blank plate .
3.Line up the display or blank plate with the display socket, making sure it is in the chosen orientation.
4.Firmly press the flanges in place. Do not press in the middle of the display.
5.Route the display’s North American style
