Operation
Reporting While Battery Monitoring
The XC Series is considered to be battery monitoring if it is experiencing a charger level fault. If there is a charger level fault (affecting all banks), all charging will be suspended until the charger fault is resolved (see “Error Messages on Remote Display” on page
The remote will display all of the following, in order:
•Highest level charger fault or warning (if present)
•Bank 1 Highest level bank fault or warning (if present)
•Bank 1 Charging Stage
•Bank 1 Battery Voltage
•Bank 1 Charger Current
•Bank 2 Highest level bank fault or warning (if present)
•Bank 2 Charging Stage
•Bank 2 Battery Voltage
•Bank 2 Charger Current
•Bank 3 Highest level bank fault or warning (if present)
•Bank 3 Charging Stage
•Bank 3 Battery Voltage
•Bank 3 Charger Current
Reporting While Disabled
If AC power has been disconnected or if you have used the remote display to disable the XC Series the unit is considered to be disabled. The remote display is also disabled at this time.
While the XC Series is disabled, you may wish to see the present status of the banks.
To view the present status of the banks:
◆Press ON/STANDBY.
If AC power is disconnected, the remote display will show one cycle (similar to the battery monitor cycle) for each bank that was qualified as present and healthy during the last battery detection cycle. The remote display will turn itself off after one complete cycle.
