Introduction

Information Centers of the XC Series

Remote Display

This section describes the parts of the remote display of the XC Series. The remote display can be rotated 180°, or it can be removed and remotely mounted up to 20 m (65 ft) from the XC Series for convenience. Figure 1-2 shows the remote display.

A “press and hold” action on the remote display means that the button must be held down for more than 2 seconds in order to send the instruction. A “press” action on the remote display means that the button must be pressed and released before 2 seconds have elapsed.

2

3

4

5

1

 

 

6

7

Figure 1-2XC Series Remote Display

Item Description

1ON/STANDBY push button

Press to turn on or disable the charger while AC power is connected

Press and hold to apply selection when in setup or equalization mode

Press to show battery bank voltages when AC is disconnected

2Battery bank indicator lights

Illuminate to show which bank has been selected for setup or status display

Illuminate during a fault or warning to show which bank has the fault or warning, or illuminate all three if the charger itself has the fault or warning

1–4

975-0187-01-01

Page 16
Image 16
Xantrex Technology XC5012, XC2524, XC3012, XC1524 manual Information Centers of the XC Series, Remote Display