Navigating the Menu System
•When the CUR mode is selected, the current set point will blink in the output current display.
2.Use the Rotary knob/Enter button to adjust the set point.
The adjustments you make to the set point affect the opposing output value (voltage when in CUR mode or current when in VOL), which will update in the
3.Press the Rotary knob/Enter button to enter fine adjust tracking mode.
The set point blinks faster when the unit is in fine adjust tracking mode.
4.Use the Rotary knob/Enter Button to fine tune the set point.
5.Once the set point has been selected, press the Rotary knob/Enter Button to exit tracking mode and return to normal display mode.
To access the select and set entry mode for the voltage and current set | 3 |
points: |
|
1.Select VOL or CUR position on the mode control knob.
2.Press the Rotary knob/Enter button twice to scroll past the coarse and fine tracking modes without making any adjustment to the value. Coarse select and set mode has been selected.
3.If a change is made accidentally in tracking mode, select and set mode will not be available and you’ll need to start again at Step 1.
4.Select the desired value for this set point and then set the value using the Rotary knob/Enter button.