US E R GU I D E (CO P I E R )
Stapling
This section describes the procedure for programming the Output feature to staple output. You must have a Finisher (optional accessory) to staple output.
1On the Added Features tab select Output.
2Select Collated/Stapling.
3Select Stapling. The Stapling screen is displayed.
4Select the desired stapling position.
The Finisher Tray is automatically selected as the Output Destination.
5Select the desired Original Orientation:
•Head to Top
•Head to Left
Select Save.
6Select Start to make copies or Save to select additional features.
