US E R GU I D E (CO P I E R )
Border Erase
The Border Erase feature enables you to eliminate unwanted marks near the edges of the original from the output copy. The range for Border Erase is 0 through 50mm in 1mm increments.
Border Erase offers the following options which can be used individually or combined together:
Top & Bottom For Normal the default is 2mm. For Variable Erase the default is 5mm.
Left & Right For Normal the default is 2mm. For Variable Erase the default is 5mm.
Center The default is 0mm.
1
2
3
4
5
The selected settings are applied to both the front and back of 2- sided copies.
When the image is reduced or enlarged, the selected percentage will be applied to the Border Erase. For example, if Variable Erase is set to 30mm, a 50% reduction will result in 15mm of border erase on the output.
When making copies the copier always automatically adds a Border Erase of 2mm to the top, bottom, left and right. This cannot be eliminated.
On the Added Features tab select Border Erase.
Select Variable Erase.
Press the up or down arrows to increase or decrease the Border Erase amount(s) for Top & Bottom, Left & Right, and Center.
Select the icon that most closely resembles the Original Orientation for the loaded document(s).
Select Start to make copies or Save to select additional features.
