US E R GU I D E (CO P I E R )
Loading Documents in the DADF
You can load up to 50 documents from 16 lb. to 32 lb. (64 to 128 gsm) into the DADF.
1Remove any paper clips or staples from the documents. Align the documents.
2Place the documents face up in the Original Input Area of the DADF. Slide the documents to the left until the green Document Feed Lamp lights.
If the lamp does not light, readjust the alignment and or the placement of the documents until the lamp lights.
3Slide the document guide toward the stack of documents until the guide lightly touches the side edges of the documents. If the document guide is set too tight, the documents may not feed or may become damaged. If the guide is set too loose, the documents may skew as they feed, which could cause a document jam.
4Extend the DADF Original Catch Tray to accommodate the size of the documents.
5Press the Start button.
The documents automatically feed one by one, onto the Document Glass. The feeding begins from the top of the stack of documents.
