Xerox 4595 manual Loading paper in Tray 8 Post-Process Inserter

3. Loading Paper

5.Move both Paper Weight Switches to their appropriate positions.

6. Push the tray in gently until it comes to a stop.

NOTE: When the loaded tray is closed, the tray position is automatically adjusted in the front/back direction based on the paper size.

Loading paper in Tray 8 (Post-Process Inserter)

Use the following procedure for loading paper into the Post-Process Inserter (Tray 8),

KEY POINT: The Post-Process Inserter (Tray 8) is used when your desired output includes separators, or covers; therefore, it cannot have an image copied on to it. Your separator or cover paper may be blank or with an image already copied onto it.

1.Hold the center of the paper guides and slide to the desired paper size.

2.Load the separator or cover paper into the tray; ensure that is aligned to the front of the tray.

Xerox 4595 Copier/Printer Getting Started 3-7