Fuser Area

If jammed in the fuser area, ‘PAPER JAM 1’ appears in the display.

WARNING: The fuser area is hot. Take care when removing paper from the machine.

￿Press the release latch to open

the side cover.

￿ Pull down on the fuser lever as shown below. This will release pressure on the paper.

￿ If paper is not seen in this area, skip to the Exit Area.

Troubleshooting

CAUTION: Do not pull paper up through the fusing unit. Unfused toner may adhere in the area, resulting in smudged copies.

￿Remove the jammed paper, in

the direction shown.

Xerox WorkCentre M15/M15i User Guide

Page 11-7

Page 153
Image 153
Xerox M15 manual Fuser Area