Xerox M15 manual Clone, Long, Edge, Short

Copy

	Clone	Use to print multiple images	￿ Press [Reduce/Enlarge] repeatedly until ’CLONE’
		on a single sheet of paper.	displays.
		The number of images	￿ Press [Enter] to save the selection.
		produced is determined
		automatically based on the	￿ Place the original on the Document Glass, lower
		original image size.	the cover and press [Start].
		￿ Only available using the	The machine pre-scans the original to determine
		Document Glass, ensure the	the number of images to be printed on a page.
		ADF is empty.
			The machine completes the job.
Collated	ON/OFF	Use to produce collated	￿ Press [Collated] to display the current setting.
￿ Use to produce		output e.g. 2 copies of a 3	￿ Press [Collated] to select ’ON’.
		page job will print one
collated copy
sets.		complete document,	￿ Press [Enter] to save the selection.
		followed by the second
		completed document.
1 - 2 - Sided	OFF	Use to switch off 2-Sided	￿ Press [1 - 2 - Sided Copy] repeatedly until the
Copy		copying.	required setting displays.
￿ Use to produce 2			￿ Press [Enter] to save the selection.
	Long	Produces copies with the
sided copy	Edge	binding orientation along
output.			￿ Scan 1 - 2 Sided originals using the ADF or the
		the long edge of the paper.
			Document Glass.
	Short	Produces copies with the	￿ To scan 2 - 2 Sided originals use the Document
	Edge	binding orientation along
			Glass. Scan side 1 and when prompted, turn over
		the short edge of the paper.
			the original and select [YES] to scan side 2.
			Repeat the procedure until all originals have been
			scanned. Then use the	key to select [NO]
			and press [Enter].

Page 4-8 Xerox WorkCentre M15/M15i User Guide