Using the Bypass Tray | Xerox M15 specification

Using the Bypass Tray

The bypass tray is located on the right side of the product. It can be closed when not in use, making the product more compact. Use the Bypass Tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper cassette.

Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch), to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m2 and 160 g/m2 (16 lb and 43 lb).

Paper and Other Media

When feeding media through the Bypass Tray the Paper Size option in System Data Settings must be set to the correct size. If feeding media smaller than A4/Letter, the setting can remain set at A4, Letter or Legal size. Refer to “System Data Settings” on page 9-3 for further information.

When copying onto a paper size smaller than A4/Letter, the printed image may be offset and not reproduce correctly, even when Auto Fit is selected.

The following table summarizes the print media allowed the maximum stacking height for each paper type.

	PAPER TYPE	MAXIMUM STACKING HEIGHT

	Plain/Bond/Colored and	100 sheets or 9 mm (0.35 inch)
	Pre-printed Paper

	Envelope	10 envelopes or 9 mm (035 inch)

	Transparency	30 sheets or 9 mm (0.35 inch)

	Label	10 sheets or 9 mm (0.35 inch)

	Cardstock	10 sheets or 9 mm (0.35 inch)

The height is measured with the stack of sheets laid, without being touched by hands, on a flat surface.

Xerox WorkCentre M15/M15i User Guide

Page 5-5

Image 67

Xerox M15 manual Using the Bypass Tray, Paper Type Maximum Stacking Height

Contents

WorkCentre M15/M15i User Guide By Xerox Corporation. All rights reserved Table of Contents Copy Maintenance 10-1 Xerox WorkCentre M15/M15i User Guide Welcome Introduction Bracket Text Typeface Specification NoteAbout This Guide Italic Typeface Related Information Sources Customer Support Safety Welcome Safety Standards Regulatory Information Section Laser Safety Question Electricity at Work Regulations UK only My premises AL7 1HE France Ireland Portugal Finland Italy Spain Regulations Europe Fax Send Header Requirements Regulations USAData Coupler Information Welcome Regulations Canada Energy Star Environmental Compliance Getting Started Tape UnpackingScanner Module Starter Toner Cartridge USB CableTelephone Line Cord Software Documentation Automatic Document Feeder ADF Making ConnectionsTelephone Line M15i Only USB Cable IEEE1284 Parallel Port Cable PowerON/OFF Switch USB or Parallel Port Cable Installing Drum and Toner Cartridges Xerox Loading Paper Max Fill Line Snubber Rear Guide Getting Started Setting the Language M15 only If necessary, press Menu/Exit Setting the Language and Country M15i only Setting the Local ID and Name M15i Only Y Z Editing Numbers or NamesSpace R S Setting the Date and Time M15i Only Run Installing Software Product Overview Overview of Features Fax Documents M15i Only Scan Documents to Create Electronic Files M15i Only Xerox WorkCentre M15i Copier, Printer, Fax and Scanner ConfigurationsMachine Overview Xerox WorkCentre M15 Copier and Printer Paper Guides ComponentsFront View Document Collate Rear View ADF Connector USB Connector Telephone Connections WorkCentre M15i Control Panel Overview Scan Options Resolution Display WorkCentre M15Menu/Exit Enter Numeric Scan Overview of ModesCopy Fax Numeric Keypad Enter Using Characters Inserting a Pause Keypad Character Assignment Copy Copy/Fax/Scan Key Copying ProcedureSelect the Copy/Fax/Scan key M15i Only Select the Paper Supply Automatic Document Feeder ADF Load the OriginalsDocument Glass Numeric Keypad Clear/Clear All Key Select the Copy FeaturesSetting required is displayed Enter the Quantity Navigation Keys Press Start Mixed Copy FeaturesFeature Description Text Auto Fit ManualAuto 400% Short CloneLong Edge Resetting the Copy Features Copy Paper and Other Media Preparing paper for loading Using the Paper CassetteLoading the Paper Cassette Rear Guide Max Fill Line Snubber Paper Type Maximum Stacking Height Using the Bypass Tray Paper and Other Loading the Bypass Tray Paper and Other Media Envelopes Media SpecificationsMedia Sizes and Types Paper Cassette Bypass Tray Plain paper Media Guidelines Special Media Guidelines Fax M15i Only Faxing Procedure Select the Copy/Fax/Scan key Numeric Keypad Navigation Keys Select the Fax FeaturesFax Features Enter the Fax Number Document Glass , use Scan Options Fax FeaturesResolution Fine Fax Resetting the Fax Features Delay Send Advanced Fax Features TX Poll Delay RX Poll Fax Job Management Cancelling a FaxConfirming a Transmission WorkCentre M15i can perform two functions simultaneously Monitoring Dual Job Status Adding to or Cancelling a Scheduled Operation Method Description Dialing MethodsKeypad Dialing Speed UsingStoring a Number Assigning Numbers To a Group Group Dialing Group Dial EditingGroup Redial DialLast Receive Modes Receiving a Fax Setting the Receive Mode Enabling Secure Receive Secure Receive Printing Secure Faxes Faxes are printed Dial and Group Dial numbers Fax ReportsReports Available Printing a Report Print Create or Open the Document Printing ProcedureSelect Print Options Select OK to Print Printing Options Windows 2000/XP Accessing Printer SettingsWindows 95/98/Me Windows NT Paper Image Quality Layout Watermark About Printer Properties Tabs Apply CancelDefaults Control Options Print Scan M15i Only Twain Scanner Program Scanning Procedure Run the Scan Application Program Machine Administration Setup Overview System Data Settings Redial Interval ECM ModeRX Reduction Discard Size Local ID Clock Mode Changing the System Data Options Administration Setting the Language and Country M15i only Setting the Local ID and Name M15i Only Editing Numbers or Names System Data Paper Size Up to 5 digits System Setup Options Finland, Germany English, FrenchSpanish, Portuguese German, Italian, Dutch Danish, Swedish Finnish, Norwegian 30, 60, 120 Timeout Setting the System Setup Options Clearing the Memory Memory Clear Copy/Fax/Scan Key Enter Adjusting Speaker Volume M15i Only Message Confirmation Reports Printing Reports ControlCentre Installing ControlCentreRunning ControlCentre Using ControlCentre Settings Tab Advanced Tab Phonebook Tab Printing Using the Document ADF Glass Number of printsInformation Tab Performed by Drum Firmware Update Tab Maintenance Cleaning the Document Glass and Cover Cleaning Document Feeder and Collate Tray Control Panel and LCD Europe USA and Canada Ordering Supplies Expected Cartridge Life Toner Save ModeCustomer Replaceable Units Toner Cartridge Maintenance ReplacingCartridge the Toner To Re-distribute the Toner Setting the Product to Send Toner Low Information Drum Cartridge Cleaning the DrumReplacing the Drum Cartridge Pull out the used drum cartridge Maintenance Maintenance System Troubleshooting General Document Jams Fault ClearanceInput Misfeed Roller Misfeed Exit Misfeed Paper Feed Area Paper Jams Troubleshooting Fuser Area Push up on the fuser lever, then close the side cover Paper Exit Area Troubleshooting Bypass Jam Duplex Jam Customer Support Telephone Number Calling the Welcome Center LCD Error Messages Toner Empty Comm. ErrorLine Error Paper Jam Copier Problems Solution Chart Toner yield is lower than Blank copiesImage rubs off the copy easily Frequent copy paper jams Printing Problems Solution Chart Computer parallel If using Windows 95,Spool setting may be set Problem Faxing Problems Solution Chart Original Received original is printedDark and is illegible or black Stripes are printed on Resetting the Machine Troubleshooting Specifications Specifications Emulation Printer Specifications Fax Specifications Scanner and Copier Specifications General Specifications Paper Type L mm L Inch Paper typesPlain paper, OHP film, Label, Envelope, Card, Postcard Available Paper sizes Source Media Types Sizes Thickness Input Source Index Index-2 Index-3 10-8 TX-RX Journal