Priority Send Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key | |||||
Use to transmit |
| until ’FAX MODE’ displays and press [Enter]. | |||
|
|
|
| ||
high priority | Program the features required for the job. | ||||
documents | |||||
|
|
|
| ||
ahead of | Press [Menu/Exit] and press | or | until ’PRIORITY SEND’ displays, then press | ||
reserved | |||||
| [Enter]. |
|
| ||
operations. |
|
|
| ||
Enter the number of the remote machine using the Numeric Keypad or the Speed Dial function.
Press [Enter] to confirm the number.
If a name is required, enter a name for the job using the Numeric Keypad and press [Enter].
The originals are scanned into memory before transmission. The display shows the memory % available and the number of pages scanned.
The document will be transmitted when the current operation is concluded. If a broadcast operation is in progress, the Priority Send will be sent between transmissions or redial attempts.
TX Poll | Load the originals and ensure the LCD displays FAX. If not, press the [Copy/Fax/Scan] key | |||||
Use to allow | until ’FAX MODE’ displays and press [Enter]. | |||||
|
|
|
|
| ||
another fax | Program the features required for the job. | |||||
machine to | ||||||
|
|
|
|
| ||
retrieve | Press [Menu/Exit] and press | or | until ’POLLING’ displays, then press [Enter]. | |||
documents from | ||||||
the WorkCentre | Press | or | until ’TX POLL’ displays, then press [Enter]. | |||
M15i. |
|
|
|
|
| |
The display requests a 4 digit poll code. The poll code is preset to 0000 at the factory, which represents no poll code. If a poll code is entered, the person retrieving the documents will need to enter the same poll code at the remote machine to gain access to the stored documents at the WorkCentre M15i.
To use a poll code enter a 4 digit code, then press [Enter].
If a poll code is not required, ensure the display shows 0000 and press [Enter].
If access to the document is required by more than one remote machine, it can be stored in the Bulletin Board memory. This allows the document to be retrieved more than once without being deleted. If it is not stored in the Bulletin Board memory, it will be erased automatically after being retrieved by one machine.
Using the 
or 
key, select ’ON’ to store the document in the Bulletin Board memory or ’OFF’ to store the document in standard memory.
Press [Enter].The originals are scanned and stored in memory ready for polling. The display shows the memory % available and the number of pages stored.
Fax (M15i Only)
Xerox WorkCentre M15/M15i User Guide | Page |
