Xerox M15 manual ECM Mode, RX Reduction, Discard Size, Redial Interval, Redials, Answer On Rings

Administration	OPTION	SETTINGS	DESCRIPTION
	ECM Mode	ON	Use to switch on ECM for all transmissions.
	￿ Error Correction		Transmission time may be increased when ECM is
			enabled.
	Mode(ECM) compensates
Machine	for poor line quality.
		OFF	Use to switch off ECM.
	RX Reduction	ON	page, the document is divided and printed at actual
			If the document can not be reduced to fit onto one
	￿ When receiving a
		OFF	size on two or more pages. With Horizontal
	document as long or longer
	than the paper loaded in		Reduction enabled, the machine reduces an
	the machine, the size of the		incoming document along the vertical axis only.
	document is reduced to fit
	the paper size.
	Discard Size	[00 - 30]	If the RX Reduction feature is turned OFF or fails,
	￿ When receiving a		and the received document is as long or longer than
			the paper selected, the machine will discard any
	document as long as or
	longer than the paper in		excess image at the bottom of the page.
	the machine, the fax
	machine can be set to		If the received page is outside the discard margin set,
	discard any excess at the		it will print on two sheets of paper at the actual size.
	bottom of the page.
			Margins can be set between 0 - 30mm (1.2")
	Redial Interval	[1 - 15]	Intervals from 1 to 15 minutes can be entered.
	￿ Sets the time between
	redials if a remote fax
	machine is busy.
	Redials	[0 - 13]	Redial attempts can be entered from 0 to 9.
	￿ Use to specify the number
	of redial attempts.
	Answer On Rings	[1 - 7]	Between 1 and 7 rings can be set.
	￿ Use to specify the number
	of rings before answering
	an incoming call.
	Send From Memory	ON	With this option it is not necessary to wait until
	￿ Sets all fax transmission		documents are sent before sending or storing other
		OFF
			fax jobs.
	documents to be
	automatically scanned into
	memory.

Page 9-4 Xerox WorkCentre M15/M15i User Guide