Xerox M15 manual System Setup Options, Up to 5 digits

Machine Administration

System Setup Options

OPTION	SETTINGS	DESCRIPTION
Receive Mode	TEL	Use to operate in manual mode. When a call is
￿ Use to set the receive		received pick up the external phone handset or press
		[Manual Dial]. If a fax tone can be heard, press [Start]
mode, depending on how
the machine is connected		and replace the handset.
to the telephone line.
	FAX	The machine answers the incoming call and
		immediately switches to fax receive mode.
	TEL/FAX	The machine answers the incoming call. If a fax tone
		is not detected, the machine sounds a ringing tone to
		indicate a voice phone call. To answer the call, press
		[Start] on the control panel, then lift the handset. If the
		external phone is not lifted while the ringing tone is
		sounding, the machine will switch to automatic fax
		reception mode.
	ANS/FAX	Use if attaching an answering machine to the
		WorkCentre M15/M15i. If the machine detects a fax
		tone, it switches to fax mode automatically.
Secure Receive	ON	Use to receive all faxes into the machine’s memory.
￿ Use to store all received		When enabling Secure Receive a secure passcode
	OFF
		can be entered to restrict access to the faxes
faxes in the machine’s
memory until printed by a	PRINT	received. If a passcode has been setup, when
user.		PRINT is selected the passcode is required.
Prefix Dial Fax No.	Up to 5 digits	The number entered will be added to the beginning of
￿ Use to set a prefix dial		each fax sent.
number.
Ringer Volume	10 Levels	To switch the ringer off, set to the left. Set to the right
￿ Use to set the ringer		for a loud ring tone.
volume level.
Alarm Sound	ON	Set to ON to enable an alarm sound.
￿ An alarm tone will sound
	OFF
when an error occurs or a
fax communication ends.
Key Sound	ON	Set to ON to enable a key sound.
￿ A key tone sounds each
	OFF
time any key is pressed.

Page 9-12 Xerox WorkCentre M15/M15i User Guide