Turning On the Projector
This section describes the procedure from turning on the power to projecting images.
Be sure to read the Safety Instructions in this manual for details on safe handling when using the projector.
Connecting the Power Cord
Procedure
1
2
3
4
5
6
Check that the power is turned off for the projector and all components connected to the projector.
Connect the computer or other video source to the projector.
Refer to the Setup Guide.
Remove the lens cap.
Connect the accessory power cord to the projector.
Check that the power cord connector is facing the same way as the power inlet on the projector, and then insert the power cord connector securely into the projector.
Connect the other end of the power cord to a grounded electrical outlet.
Lights orange | Turn on the main power switch at the |
| rear of the projector. |
Wait until the 
indicator lights orange and the projector goes to the standby condition.
6