Adjusting the Image Quality

The quality of the screen images can be adjusted as follows.

Focusing the Screen Image

Procedure

Focus ring

Turn the focus ring to adjust the image focus.

•If the surface of the lens is dirty or misted

over as a result of condensation, it may not be possible to adjust the focus correctly. If this happens, clean or de-mist the lens. (p.46)

•If the projector is positioned outside the normal projecting range of 0.9 - 13 m (2.9 - 42.6 ft.), it may not be possible to obtain the correct focus. If you have trouble obtaining the correct focus, check the projection distance.

Selecting the picture mode

The following five color modes have been preset for use with images with varying characteristics. You can use these color modes to obtain the optimum image quality easily, just by selecting whichever color mode best suits the images. The brightness of the projected images will vary depending on the mode.

Mode name

Gamma

Color Temp

Priority

Use

element

 

 

 

 

 

 

 

 

 

 

 

A

Original 1

6700

K

Color

Ideal for enjoying presentations in a natural

 

 

(adjustable)

 

atmosphere.

 

 

 

 

 

 

B

Original 2

6700

K

Color

Ideal for enjoying presentations such as movies which

 

 

(adjustable)

 

have large numbers of dark scenes.

 

 

 

 

 

 

C

Original 3

6700

K

Color

Ideal for projecting images with greater modulation

 

 

(adjustable)

 

and intensity.

 

 

 

 

 

 

PC

2.2

7500

K

Brightness

Ideal for use in making images as bright as possible

 

(Basic)

(adjustable)

 

when projecting computer images.

 

 

 

 

 

 

sRGB

2.2

6500

K (fixed)

Color

Images conform to the sRGB standard. If the

 

(Basic)

 

 

 

connected video source has an sRGB mode, set both

 

 

 

 

 

the projector and the video source to sRGB.

 

 

 

 

 

 

Procedure

Projector

Remote control

 

Picture B

The picture mode changes as shown below each time the [PICTURE MODE] button on the projector's control panel or the [PICTURE] button on the remote control is pressed.

A → B → C → PC → sRGB

The current setting appears on the screen each time the color mode changes.

The color mode setting can also be changed using the "Picture Mode" item of the projector's "Image" menu. (p.27, 28)

14