Maintenance
3 Reset Lamp Timer
Execute?
No
Yes
Reset the lamp operating time.
Select “Yes”, and then press the 
on either the projector's control panel or the remote control.
Replacing the Air Filter
Procedure
1
2
3
Turn off the power switch at the rear of 
the projector, and then disconnect the power cord. (p.9)
Put your finger into the recess in the air 
filter hook, and lift up the air filter to remove it.
Be sure to keep the projector standing up while working in order to stop foreign particles from the air filter getting inside the projector.
Install the new air filter.
First insert the tabs, and then press down on the opposite side until it clicks into place.
Dispose of used air filters properly in accordance with your local regulations.
50