Turning Off the Projector

Follow the procedure below to turn off the power of the projector.

Procedure

1

Turn off the power for the signal

sources that are connected to the

projector.

Check that the power for all connected components has been tuned off.

2

 

 

 

 

 

Please Press

Key Again

 

 

 

To Power Off

 

 

 

 

 

 

 

 

 

 

 

 

Press the [STANDBY/ON] button on either the remote control or the projector's control panel.

The confirmation message shown at left will appear.

If you do not want to turn off the power, press any button except the [STANDBY/ON] button. If you do not carry out any operation, the message will disappear after seven seconds. (The power will not turn off at this time.)

Basic Operations

3

 

Press the [STANDBY/ON] button on the

 

projector's control panel or remote

 

 

control once more.

 

 

 

 

The lamp will switch off. The

indicator will

 

 

flash red and cool-down

will start.

Projector

Remote control

After about 90 seconds, the

indicator will

change to flashing orange.

 

 

 

The buttons on the control panel and

 

 

remote control cannot be operated while

 

 

the

indicator is flashing red. Wait until

 

 

the indicator flashes orange (takes

 

 

approximately 90 seconds).

4

Lights orange

Check that the

 

indicator has

 

changed to light orange.

 

When the indicator lights orange, cool-down is complete.

The cool-down period lasts for approximately 5 minutes. (This varies depending on factors such as the ambient air temperature.)

The cool-down period is a 5 minutes long in order to allow the heat inside the projector to dissipate sufficiently.

9