Battery Replacement Period and Using the Remote Control

Battery Replacement Period

If the remote control becomes slow in responding or if it stops working, the batteries may be spent. If this happens, replace the batteries with fresh ones.

Guide for battery replacement: Approximately 3 months if used for 30 minutes per day

*The replacement period given above may vary depending on the amount of usage and the ambient conditions.

Use the following type of batteries as replacements.

Battery LR6 (AA) x 2

Using the Remote Control

Remote control light-receiving area

Point the remote control light-emitting area toward one of the remote control light-receiving area on the projector and operate the remote control buttons.

Do not allow sunlight or light from fluorescent lamps to shine directly onto the projector's remote control light-receiving area, otherwise it may interfere with the reception of signals from the remote control.

[LIGHT] (illumination) button

illumination button

When the [LIGHT] button is pressed, the buttons shown in colour in the illustration at left are illuminated for 10 seconds. If you press the [LIGHT] button again during this 10-second period, the illumination continues for another 10 seconds.

2