Using the Menu Functions

Main menu

Sub-menu

 

Function

Default

 

setting

 

 

 

 

 

 

 

 

Setup

Auto Power

This sets whether the projector's power turns off automatically or not when

Off

 

Off

the signal from the input source that was selected using the [INPUT] button

 

 

 

stops being input.

 

 

 

Setting value range : Off, 30 min., 60 min.

 

 

 

• If a time is set, and if the connected source is equipped with a timer Off

 

 

 

function, the projector's power will be turned off once the set time has

 

 

 

elapsed after the input signal has switched off.

 

 

 

This can be used to ensure the projector turns off even if the viewer falls

 

 

 

asleep while viewing.

 

 

 

• When Auto Power Off has been activated so that the projector is in

 

 

 

standby mode, the power will not turn back on again even if an image

 

 

 

signal is input once more. Press the [STANDBY/ON] button on either the

 

 

 

projector's control panel or the remote control to turn the power back on.

 

 

 

 

 

 

Trigger Out

This is an output signal for controlling external equipment.

Auto

 

 

• While projection is in progress, a voltage of +12 V is output.

 

 

 

• When “Auto” is selected, the trigger out signal turns ON and OFF in

 

 

 

accordance with the illumination of the projector's lamp. When

 

 

 

“External” is selected, the trigger out signal turns ON and OFF in

 

 

 

accordance with control signals received via the RS-232C port.

 

 

 

 

 

 

Language

Sets the display language for messages and menus.

English

 

 

• Press the

on either the projector's control panel or the remote control,

 

 

 

and select the language from the selection menu that appears.

 

 

 

 

 

 

Reset All

Resets all items in all menus to their default settings.

-

 

 

• Press the

on either the projector's control panel or the remote control

 

 

 

to display the confirmation screen, and select “Yes”.

 

 

 

• To reset the "Image" menu settings to their default values, select "Reset"

 

 

 

from the sub-menu.

 

 

 

The "Lamp" and "Language" settings will not be reset.

 

 

 

 

 

 

32