Yamaha LPX-500 manual 31

							Image menu			Setup menu
							Signal menu			Info menu
Main menu	Sub-menu				Function						Default
											setting
Image	Picture Mode	Corrects the vividness of the image color. You can select from five different									B
		quality settings depending on the surroundings.
		•A	:Ideal for enjoying presentations in a natural atmosphere.
		•B	:Ideal for enjoying presentations such as movies which have large
		•C	numbers of dark scenes.
			:Ideal for projecting images with greater modulation and intensity.
		•PC	:Ideal for use in making images as bright as possible when
			projecting computer images.
		•sRGB :Images conform to the sRGB standard.
	Color	Allows lighter colors to be adjusted so that they range from having a red									6700K
	Temp.	tinge to having a blue tinge. (p.24)
		When the color temperature is lower, the red content is greater and color
		tones appear softer. When the color temperature is higher, the blue content
		is greater and color tones appear fresher.
	Flesh Tone	The "Flesh Tone" setting adjusts the green component of image signals.									0
		(p.24)
		If adjusted to the - side, the colors appear purplish. If adjusted to the + side,
		the green component is increased. Adjust until the desired flesh tones are
		obtained.
	Color	The Offset , Gain and Gamma can be adjusted separately for each									Offset
	Balance	RGB component. (p.24)									R : 0
		Offset adjusts coloration for darker shades, Gamma adjusts intermediate									G : 0
		shades, and Gain adjusts brighter shades. The working of each adjustment									B : 0
		is shown below.
		Offset adjustment			Gain adjustment		Gamma adjustment				Gain
											R : 0
		Brightness			Brightness		Brightness
											G : 0
							When
		When			When
							adjusted to				B : 0
		adjusted to			adjusted to		the + side
		the + side			the + side
											Gamma
											R : 0
				When adjusted		When adjusted		When adjusted			G : 0
				to the - side		to the - side		to the - side			B : 0
				Input signal		Input signal		Input	signal
		Each RGB component can be adjusted to give the desired level of
		coloration to dark, intermediate and light ranges.
	Sharpness	Adjusts the image sharpness.									0
	Memory	This lets you save image adjustment settings and to retrieve them by									-
	Save	pressing the corresponding remote control memory buttons.
		The images being projected will be adjusted according to the settings that
		are retrieved. (p.24)

•The current settings are saved to a particular recording area number when that number is selected.

•The setting values that are saved to memory can be cleared by selecting "Reset All".

Reset Image Resets all adjustment values for the “Image” menu functions to their		-
default settings. However, all settings that are stored in memory are
retained.
• Press the	on either the projector's control panel or the remote control
to display the confirmation screen, and select Yes.
• Select “Reset All” to return all menu settings to their default settings.
(p.32)

Advanced Operations

27