Turning Off the Projector

5

If not using the projector for long

periods of time, turn off the main power

switch at the rear of the projector.

Do not turn off the main power switch at the rear of the projector while the cool-down is in progress. If the main power switch is turned off before cool-down is complete, wait for the lamp to cool down (normally about one hour is required) before turning the power back on again. If the power is turned off and on before the lamp has cooled down, it may result in lamp operating errors.

Refer to "Lamp operating error" on page 36.

6

Retract the front adjustable foot if it is

extended.

Turn the front adjustable foot to retract it.

7

Attach the lens cap.

Attach the lens cap to the lens when not using the

 

projector, in order to stop the lens from getting

 

dusty or dirty.

10