| Adjusting the Image Size |
| Correcting Keystone |
|
|
|
| Distortion |
|
|
|
|
|
|
| Adjusting the Image Angle |
| Displaying a Test |
|
|
|
| Pattern |
|
|
|
|
|
|
|
|
|
|
|
Displaying a Test Pattern
When setting up the projector, you can project a test pattern onto the screen and use this test pattern to adjust the projected images before a video source has been connected. The following two types of test pattern are available.
•Crosshatch
•Grayscale pattern
This can be used to adjust the focus and correct keystone distortion.
This can be used to adjust dark and light shades to the desired shade. Use the "Color Temp.
", "Flesh Tone" and "Color Balance" commands in the "Image" menu to adjust the settings.
Basic Operations
The test pattern changes as shown below each time the [PATTERN] button on either the remote control or the projector's control panel is pressed.
Crosshatch → Grayscale pattern → No pattern
The full menu cannot be displayed while a test pattern is being projected. If you need to change a
setting, press the 
button on either the projector's control panel or the remote control to display the line menu, and then change the setting. To correct keystone distortion while a test pattern is being displayed, press and hold the [SHIFT] button and then use the 
and 
buttons on the projector's control panel to make the adjustment. This setting cannot be made using the remote control.
13