Using the Menus Memory Save
Description of Functions
5
Projector | Remote control |
Exit the menu display.
Press the [MENU] or [ESCAPE] button on either the projector's control panel or the remote control.
If you do not press a button for 5 seconds while a line menu is displayed, the line menu disappears automatically.
Description of Functions
This section describes
This adjusts the "Black Level" and "White Level" settings in accordance with the signals being input, so that the images do not become distorted. To adjust the colours, use the "Color Temp.", "Flesh Tone" and "Color Balance" commands.
Black Level Adjustment
This adjusts the brightness of dark shades. It lets you adjust dark shades without affecting the brightness of light shades.
Use the "Black Level" item in the "Image" menu to change the setting. (p.26, 28)
Brightness
When adjusted to the + side
When adjusted to the - side
Input signal
If adjusted to the + side, the luminosity of dark scenes increases and different tones become clearer, but contrast is reduced.
If adjusted to the - side, the brightness of dark shades is reduced and images with greater contrast are obtained, but differences in dark areas become less distinct.
Advanced Operations
White Level Adjustment
This adjusts the brightness of light shades. It lets you adjust light shades without affecting the brightness of dark shades.
Use the "White Level" item in the "Image" menu to change the setting. (p.26, 28)
Brightness
When adjusted to the + side
When adjusted to the - side
Input signal
If adjusted to the + side, the luminosity of light scenes increases and contrast become clearer, but differences in light tones are reduced.
If adjusted to the - side, differences in light areas become more distinct, but contrast is reduced.
23