Yamaha LPX-500 manual 35

Image menu

Setup menu

Signal menu

Info menu

Main menu

Sub-menu

Function

Default

setting

Signal

Setup Level

(Adjustment is only possible when NTSC, 480i/p, 576i/p, 720p and 1080i

0%

signals are being input.)

This setting does not normally need to be changed when connecting the

projector to video equipment that is designed for use within Japan.

If connecting the projector to video equipment outside Japan that has

different black level settings, or if connecting to equipment in Japan that

lets you vary the black level setting, you may need to use this command to

adjust the projected images so that they display correctly. Check the

specifications of the video equipment being connected before changing this

setting.

Zoom

Sets the display position and vertical enlargement ratio for "Zoom

V Size : 2

Subtitle

-Subtitle-" images according to the selected aspect ratio.

V Position : 10

•V size

:This adjusts the vertical enlargement ratio without changing

the size in the horizontal direction.

•V position :This moves the display position up.

Setup Menu

Image

Signal

Setup

Info

Installation

Keystone

0

No Signal

Off

Black

Blue

Startup Screen

Off

On

Hide Screen

Black

Blue

Auto Power Off

Off

30min.

60min.

Trigger Out

External

Auto

Language

English

Reset All

+,- :Select

:Enter

Main menu

Sub-menu

Function

Default

setting

Setup

Installation

Selects the projection method in accordance with the projector and screen

setting-up method.

•

:Projection from the front of the screen

•

:Projection from the front of the screen with the

projector installed to the ceiling (upside down)

•

:Projection from the rear of the screen

•

:Projection from the rear of the screen with the projector

installed to the ceiling (upside down)

Keystone

• Corrects keystone distortion in images. (p.12)

0

• When keystone correction is carried out, the projected image will become

smaller.

• The keystone correction settings are memorized, so that if you change the

position or angle of the projector, you may need to readjust the keystone

correction setting.

• If the images become uneven in appearance after keystone correction is

carried out, decrease the “Sharpness” setting.

No Signal

Sets the screen status when no video signal is being input.

Blue

•Off

:Screen is completely black.

•Black :Screen is completely black and a no signal message appears.

•Blue

:Screen is completely blue and a no signal message appears.

Startup

This sets whether a starting-up screen (YAMAHA logo) is used or not.

On

Screen

Hide Screen

Sets the screen status when the [HIDE] button on the remote control is

Black

pressed. The screen status can be selected from either “Blue” or “Black”.

Advanced Operations

31