When the Indicators Provide No Help

Condition

Images appear dark

Probable cause

Remedy

 

 

Is the lamp due for replacement?

If the LAMP/COVER indicator is flashing orange, it means that the lamp will soon be due for replacement. When the lamp is nearly due for replacement, the image will become darker and the tint will become poorer.

Replace the lamp with a new one. (p.48, 49)

Condition

Images appear green

Probable cause

Remedy

 

 

Do the settings for component video input signals match the signals from the connected device?

If the “Component” or “RGB” settings are incorrect, the images may appear greenish.

Use the “INPUT A Signal” or “INPUT B Signal” commands in the “Signal” menu to select the signal format that matches the connected source. “Signal” - “INPUT A Signal” , “INPUT B Signal” (p.30)

Condition

The remote control does not work

Probable cause

Remedy

 

 

Is the remote control being pointed at the right angle?

The operating angle for the remote control is approximately 30° horizontally and approximately 30° vertically. Use the remote control within these ranges. (Setup Guide)

Is the remote control too far from the projector?

The operating distance for the remote control is approximately 7 m (23 ft.). Use the remote control within this distance. (Setup Guide)

Is direct sunlight or strong light from fluorescent lamps shining onto the remote control light-receiving area?

Avoid using projector in places where the remote control light-receiving area is exposed to strong light.

Are there batteries in the remote control?

Insert batteries into the remote control. (Setup Guide)

 

 

Are the batteries dead?

Replace the batteries with new ones. (Setup Guide)

 

 

Have the batteries been inserted correctly?

Insert the batteries so that they face in the correct

 

direction. (Setup Guide)

 

 

42