■Yamaha CD player controls
The following buttons can be used to control a Yamaha CD player when CD is selected as the input source for Zone 2.
AYamaha CD player control buttons
• | s | Stops playback |
• | e | Pauses playback |
• | p | Starts playback |
• | DISC SKIP | Skips to the next disc in a CD changer |
|
| CONTROLS AND FUNCTIONS |
• | b | Skips backward |
• | a | Skips forward |
• |
| Ejects the disc |
• | w | Rewinds playback |
• | f |
Note
Not all Yamaha CD players can be controlled by the Zone 2 remote control.
INTRODUCTION
Using the remote controls
■Installing batteries
AAA, R03,
■Replacing the battery in the Zone 2
remote control
Change the battery when the operation range of the Zone 2 remote control decreases.
Straight pin
CR2025 battery
■Operation range
The remote controls transmit a directional infrared beam. Be sure to aim the remote controls directly at the remote control sensor on the front panel of this unit or on the infrared signal receiver in Zone 2 during operation.
Approximately
6 m (20 ft)
Remote control or Zone 2 remote control