CONTROLS AND FUNCTIONS

Front panel

y

indicates buttons and controls that can also be used to control Zone 2. For more information about Zone 2, see pages 45 and 46.

1MAIN ZONE A

Turns on this unit’s Main Zone unit or sets the Main Zone to standby mode (see page 16).

Note

In standby mode, this unit consumes a small amount of power to receive infrared signals from the remote control.

2MAIN ZONE indicator

Lights up as follows: Brightly lit: Power is on Dimly lit: Standby mode

Note

The MAIN ZONE indicator is brightly lit while an iPhone/iPod is charging.

3SPEAKERS A/B

Turns on or off the speaker set connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel each time the corresponding button is pressed (see page 16).

4DIMMER

Changes the brightness level of the front panel display. Choose brightness from 3 levels by pressing this button repeatedly.

(R-S700)

y

This setting is retained even if you turn off this unit.

5FM MODE/INFO

Changes the FM radio wave reception mode (stereo or monaural) when TUNER is selected as the input source (see page 21).

Changes the SIRIUS Satellite Radio information displayed on the front panel display when SIRIUS is selected as the input source (see page 34).

Changes the playback information displayed about the song playing on the iPhone/iPod when DOCK is selected as the input source (see page 36).

Note

Playback information can only be displayed for an iPhone/iPod that is connected using a Universal Dock for iPod.

6MEMORY

Stores the current FM/AM station as a preset when TUNER is selected as the input source (see page 23). Stores the current SIRIUS channel as a preset when SIRIUS is selected as the input source (see page 30).

7CLEAR

Clears the current FM/AM preset station when TUNER is selected as the input source (see page 24).

Clears the current SIRIUS preset channel when SIRIUS is selected as the input source (see page 32).

8Front panel display

Shows information about the operational status of this unit.

4 En