CONTROLS AND FUNCTIONS

Zone 2 remote control (R-S700 only)

This section describes the function of each button on the Zone 2 remote control, which is used to control Zone 2.

Insulation sheet

Note

The Zone 2 remote control comes with a battery already installed. Before using the Zone 2 remote control for the very first time, pull out the insulation sheet, as shown.

Common controls for Zone 2

The following buttons can be used no matter which input source is selected for Zone 2.

1Infrared signal transmitter

Sends infrared signals.

2A (Zone 2 standby)

Sets Zone 2 to standby mode.

3(Zone 2 on)

Turns on Zone 2.

4ID

Changes the Zone 2 remote control ID (see page 44).

5Zone 2 input selector buttons

Selects the desired input source for Zone 2.

6MUTE

Mutes the sound output to Zone 2. Press again to restore the sound output to the previous volume level.

7VOLUME +/–

Increases or decreases the sound output level of Zone 2.

SIRIUS and FM/AM controls

The following buttons can be used when SIRIUS or TUNER is selected as the input source for Zone 2.

8FM/CATEGORY l, AM/CATEGORY h

Sets the FM/AM tuner band to FM or AM when TUNER is selected as the input source (see page 20).

Selects a channel category when SIRIUS is selected as the input source (see page 29).

9PRESET j / i

Selects a preset FM/AM station when TUNER is selected as the input source (see page 24).

Selects a preset SIRIUS channel when SIRIUS is selected as the input source (see page 31).

0TUN./CH jj / ii

Selects the tuning frequency when TUNER is selected as the input source (see page 20).

Searches for a SIRIUS channel when SIRIUS is selected as the input source (see page 29).

ANumeric buttons, ENTER

Specifies the frequency or the preset number of the FM/ AM station when TUNER is selected as the input source (see page 21).

Specifies the channel number or preset number of the SIRIUS channel when SIRIUS is selected as the input source (see page 30).

iPod controls

The following buttons can be used when DOCK is selected as the input source for Zone 2, for listening to an iPhone/iPod. For more information, see page 35.

BMENU/ Ee / b / a / ENTER

C /

10 En