| FM/AM TUNING | |
Manual station preset | 3 Press PRESET j / i on the front panel (or | |
You can manually register up to 40 FM/AM stations | PRESET F / G on the remote control) to | |
| select the preset number to which the station | ||
(40 total). You can then easily recall any preset station by | ||
| will be registered. | ||
selecting its preset number. | ||
When you select a preset number to which no station | ||
| ||
| is registered, “EMPTY” is displayed. When you | |
| select a preset number to which a station has already | |
| been registered, the frequency of the station is | |
| displayed. |
PRESET j / i
MEMORY | Preset number |
|
| y |
| You can also select a preset number using the numeric buttons on |
| the remote control. |
|
|
PRESET F / G | 4 Press MEMORY on the front panel. |
| When registration is complete, the display returns to |
| the original state. |
| y |
| To cancel registration, RETURN on the remote control or do not |
| perform any operations for about 30 seconds. |
RETURN
Numeric buttons
OPERATION | BASIC |
|
|
See pages 20 and 21 for tuning instructions.
2Press MEMORY on the front panel.“MANUAL PRESET” is displayed briefly on the front panel display, and then the preset number to which the station will be registered is displayed.
y
By holding down MEMORY on the front panel for more than
2 seconds, you can skip the following steps and automatically register the selected station to an empty preset number (i.e., the preset number following the last preset number used).