3Use D / E (to select a digit to edit) and B / C
(to select a number) on the remote control to enter the 4-digit code number.
•If you are entering a code number for the first time, enter the desired code number.
•If you have entered a code number before, enter the same code number.
The entered code number is needed for tuning in the channel or unlocking the channel. Write it down below. Code number: ________________________________
y
You can also enter the code number using the numeric buttons on the remote control.
4Press ENTER on the remote control.
y
If the code number was entered for the first time, a confirmation message is displayed. Press ENTER again to confirm the code number.
The SIRIUS channel number and channel name are displayed on the front panel display.
Notes
•If a code number is already registered and you enter a different number, “WRONG” is displayed and the display returns to step 3. Enter the correct code number.
•If you forget the Parental lock code or want to change it, reset it using “SR PIN” (see page 43).
5Search for a channel to be locked or unlocked.
For details on searching channels, refer to the following pages.
•All channel search mode (see page 29)
•Category search mode (see page 29)
Note
When searching for a channel, the sound of the selected channel can be heard even if the channel is locked.
LISTENING TO SIRIUS Satellite Radio™
6Press ENTER on the remote control to lock or unlock the selected channel.
•If the selected channel is locked, the channel number and “LOCKED” are displayed on the front panel display.
•If the selected channel is unlocked, the front panel display changes from “LOCKED” to the channel name.
7Repeat steps 5 and 6 to lock or unlock other channels as desired.
8Press OPTION once or press RETURN repeatedly on the remote control to exit the “Parental Lock”.
•If the last channel you selected was locked, the unit tunes in to “184 Weather/Emergency” or “000 SIRIUS ID”.
•If the last channel you selected was unlocked, the unit tunes in to that channel.
■Tuning in to the locked channels
Tune in to the channel using direct number access mode (see page 30) or preset search mode (see page 31). When you tune in to a locked channel “LOCKED” is displayed on the front panel display, followed by the following message. Enter the Parental lock code set previously by using the numeric buttons on the remote control. To cancel this operation, press ENTER on the remote control.
Numeric buttons, 
ENTER
Note
If the number you entered does not match the code number, “WRONG” is displayed on the front panel display and this unit tunes in to the previously selected channel.
OPERATION | BASIC |
|
|