ZONE 2

Controlling Zone 2

Use the supplied remote control, Zone 2 remote control (R-S700 only) or front panel to control the input source or adjust the sound output level of Zone 2 independently of the listening conditions in the main room.

*Sound output level can be adjusted on the R-S700 only.

Note

When using the R-S500, follow the procedure described in “Using the remote control” and “Using the front panel”.

■Using the Zone 2 remote control (R-S700 only)

(Zone 2 on)

1 Press

 

(Zone 2 on) on the Zone 2 remote

 

control to turn on Zone 2.
2Use the Zone 2 remote control as desired.

For information about each of the buttons on the Zone 2 remote control, see “Zone 2 remote control (R-S700 only)” on page 10.

■Using the remote control

1

2

MAIN/

ZONE 2

1Change the zone that is operated by the remote control.

•To control the Main zone

Press and hold the MAIN/ZONE 2 button and the numeric button 1 on the remote control together for about 3 seconds.

•To control Zone 2

Press and hold the MAIN/ZONE 2 button and the numeric button 2 on the remote control together for about 3 seconds.

2Use the remote control as desired.

For information about the buttons that can be used to control Zone 2, see “Remote control” on page 8. Buttons that can be used to control Zone 2 are

indicated by “ ” on page 8.

■Using the front panel

ZONE 2 CONTROL

ZONE 2

1Press ZONE 2 on the front panel to turn on Zone 2.
2Press ZONE 2 CONTROL on the front panel to control Zone 2.

The ZONE 2 indicator on the front panel display blinks for about 10 seconds. During this time, you can control Zone 2 from the front panel.

For information about the buttons and controls that can be used to control Zone 2, see “Front panel” on page 4. Buttons and controls that can be used to

control Zone 2 are indicated by “ ” on page 4.

46 En