FM/AM TUNING
Automatic station preset (FM stations only)
You can use the automatic station preset function to automatically register FM stations as presets. This function enables this unit to automatically tune in to FM stations that have a strong signal and store up to 40 of those stations in order. You can then easily recall any preset station by selecting its preset number.
Notes
•If a station is registered to a preset number that already has a station registered to it, the previously registered station is overwritten.
•If the station you want to store is weak in signal strength, try using the manual preset tuning method.
y
FM stations registered as presets using the automatic preset registration feature will be heard in stereo.
The Option menu for TUNER is displayed (see page 40).
4Press B / C on the remote control to select “Auto Preset”, and then press ENTER.
This unit starts scanning the FM band about 5 seconds later from the lowest frequency upwards.
y
•Before scanning begins, you can specify the first preset number to be used by pressing PRESET j / i on the front panel (or PRESET F/G or B/C on the remote control).
•To cancel scanning, press FM or AM on the front panel (or FM or AM or RETURN on the remote control).
FM | INPUT selector |
PRESET j / i
TUNER
PRESET F / G
FM
OPTION 
B / C
ENTER 
RETURN 
1Rotate the INPUT selector on the front panel (or press TUNER on the remote control) to select TUNER as the input sourse.
2Press FM on the front panel (or FM on the remote control) to select FM as the reception band.
FM is displayed on the front panel display.
Preset number | Frequency |
When presets are registered, information is displayed on the front panel display as shown in the illustration above.
When scanning is complete, “FINISH” is displayed and then the display returns to the Option menu. To return the display to the original state, press OPTION or RETURN on the remote control.