CONNECTIONS
Connecting speakers and source components
CAUTION•Do not connect this unit or other components to the main power until all connections between components are complete.
•All connections must be correct: L (left) to L, R (right) to R, “+” to “+” and
•Use RCA cables for audio components (except for speaker connections and DOCK jack connections).
•The IMPEDANCE SELECTOR must be set to the appropriate position before connecting speakers. See page 13 for details.
•Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers.
Turntable
|
|
| Tape deck |
Audio |
| Audio | Audio |
out | GND | out | in |
For information about | Speakers A |
other components that |
|
can be connected to |
|
this unit, see page 35. |
|
Audio | Audio | Audio | Audio | Audio |
|
out | out | out | in | out |
|
CD player | VCR, etc. | DVD player, | CD recorder, | Subwoofer | Speakers B |
|
| etc. | etc. |
|
|
y
•The PHONO jacks are designed for connecting a turntable with an MM cartridge.
•Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise without the GND connection.