FM/AM TUNING

 

Recalling a preset station

Clearing a preset station

You can recall preset stations that were registered using automatic station preset or manual station preset.

Follow the steps below to clear a preset station.

CLEAR

PRESET j / i

PRESET F / G

RETURN

1Press PRESET j / i on the front panel (or PRESET F / G on the remote control) to select a preset number.

y

•Preset numbers to which no stations are registered are skipped.

•“NO PRESETS” is displayed if no stations are registered.

•You can directly select a preset number by pressing the numeric buttons on the remote control while recalling a preset station. “EMPTY” is displayed on the display if you enter a preset number to which no station is registered. “WRONG NUM.” is displayed if you enter an invalid number.

•When you press the numeric buttons on the remote control during normal tuning, a frequency is entered. Set the tuning mode to preset tuning mode using PRESET j / i on the front panel (or PRESET F / G on the remote control) before pressing numeric buttons.

1Select the desired preset station number.

See “Recalling a preset station” on page 24.

2Press CLEAR on the front panel.

The selected preset number flashes on the front panel display.

y

To cancel clearing the preset station, press RETURN on the remote control or leave this unit without any operations for about 30 seconds.

3Press CLEAR on the front panel to confirm.

“PXX: CLEARED” (XX indicates the preset number) is displayed on the front panel display, and then the display returns to its original state.

24 En