FM/AM TUNING
There are 2 tuning methods; automatic and manual. Select either method according to your preference and the strength of station signals.
Automatic tuning
Automatic tuning is effective when station signals are strong and there is no interference.
INPUT selector
TUNING/CH jj / ii
FM, AM
TUN./CH H / I
TUNER
3Press and hold TUNING/CH jj / ii on the front panel (or TUN./CH H / I on the remote control) for more than 1 second to begin automatic tuning.
Press ii (or H) to tune in to a higher frequency. Press jj (or I) to tune in to a lower frequency.
Notes
•When you tune in to a station, the frequency of the station is displayed on the front panel display.
•If the tuning search does not stop at the desired station because the station signals are weak, try using the manual tuning method.
■Auto Mute feature
When listening to an FM radio station, the output will automatically be muted when the radio signal is weak if the station was tuned in to by:
•using the automatic tuning feature
•recalling a preset that was registered using the automatic preset registration feature
If you want to listen to a station that has a weak signal, tune in to the station manually.
FM, AM
1Rotate the INPUT selector on the front panel (or press TUNER on the remote control) to select TUNER as the input source.
2Press FM or AM on the front panel (or FM or AM on the remote control) to select the reception band (FM or AM).
FM or AM is displayed on the front panel display.