TROUBLESHOOTING

■Remote control

Problem

Cause

Remedy

See

page

 

 

 

 

 

 

 

The remote control

Wrong distance or angle.

The remote control will function within a maximum

11

does not work nor

 

range of 6 m (20 ft) and no more than 30 degrees off-

function properly.

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an

Reposition this unit.

 

 

inverter type of fluorescent lamp, etc.) is

 

—

 

striking the remote control sensor of this

 

 

 

 

 

unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries.

11

 

 

 

 

 

The remote control ID and this unit’s ID

Switch the remote control ID or this unit’s ID.

44

 

do not match.

 

 

 

 

 

 

 

 

 

The remote control code was not correctly

Try setting another code of the same manufacturer

49

 

set.

using “LIST OF REMOTE CONTROL CODES” at

 

 

the end of this manual.

 

 

 

 

 

 

Even if the remote control code is

Use the supplied remote control for the components.

—

 

correctly set, there are some models that

 

 

do not respond to the remote control.

 

 

 

 

 

 

 

You did not press the input selector button

Press the input selector button corresponding to the

—

 

corresponding to the component you are

component you are trying to control, and then press

 

trying to control.

the desired remote control button(s).

 

 

 

 

 

 

The remote control is not set to the correct

Set the remote control to the correct zone, the Main

46

 

zone.

zone or Zone 2, and then operate the remote control.

 

 

 

 

 

 

 

If the remote control batteries are weak or

Replace all batteries, and then set the remote control

 

 

removed, the remote control ID and zone

ID and zone again.

44, 46

 

will switch to the default settings (ID2 and

 

 

 

 

 

Main zone).

 

 

 

 

 

 

56 En