ADVANCED SETUP
Switching the remote control ID
When using multiple Yamaha receivers or amplifiers with the same default code setting, you may unintentionally operate those components simultaneously. In this case, set one of the alternative codes for this unit to operate this unit separately.
| 1 |
ID | 2 |
|
ID
1
2
•Switching to ID1
Press and hold the ID button and the numeric button “1” on the remote control together for about 3 seconds.
•Switching to ID2
Press and hold the ID button and the numeric button “2” on the remote control together for about 3 seconds.
| Remote control ID* | Function | |
(this unit’s setting) | ||
| ||
|
| |
ID1 | To operate this unit using | |
an alternative code. | ||
| ||
|
| |
ID2 | To operate this unit using | |
(default setting) | the default code. | |
|
|
*When you change the remote control ID, you must change the remote control ID of this unit (see page 43).
Note
If the remote control batteries are weak or removed, the remote control ID will switch to the default setting (ID2). In this case, replace the batteries and set the remote control ID again.