Details of the menu items are as follows. The configuration will be reflected to the input source currently selected.

y

The default settings are marked with “*”.

Volume

Submenus:

MaxVol, IniVol

Adjustable range

(MaxVol): –30.0dB to +15.0dB, +16.5dB* (5.0 dB step)

Adjustable range

(IniVol): Off*, Mute, –89.5dB to +16.5dB (0.5 dB step)

Sets items for volumes.

MaxVol (Maximum volume)

Sets the maximum volume level so that the volume will not be accidentally increased above a certain level. For example, you can adjust the volume between –89.5 dB and –5.0 dB (or Mute) when you set this parameter to “–5.0dB”. The volume can be increased to the maximum level when this parameter is set to +16.5 dB (default).

IniVol (Initial volume)

Sets the volume at the time this unit is turned on. When this parameter is set to “Off”, the volume level used when this unit was set to standby is applied.

Note

If “MaxVol” is set to a value lower than the “IniVol” setting, the setting for “MaxVol” overrides the “IniVol” setting. For example, if you set “MaxVol” to “–30.0dB” and “IniVol” to “0.0dB”, the volume is automatically set to “–30.0dB” the next time this unit is turned on.

Zone2 Volume (R-S700 only)

Submenus:

MaxVol, IniVol

Adjustable range

–30.0dB to +15.0dB, +16.5dB* (5.0 dB step)

(MaxVol):

Adjustable range

Off*, Mute, –89.5dB to +16.5dB (0.5 dB step)

(IniVol):

Sets the maximum volume level and initial volume level of Zone 2.

MaxVol (Maximum volume)

Sets the maximum volume level for Zone 2. Refer to “MaxVol (Maximum volume)” above.

IniVol (Initial volume)

Sets the volume at the time Zone 2 is turned on. Refer to “IniVol (Initial volume)” above.

y

The “ZONE 2” indicator on the front panel display flashes when the Zone2 volume is adjusted.

SETTING THE OPTION MENU FOR EACH INPUT SOURCE

Note

If “MaxVol” is set to a value lower than the “IniVol” setting, the setting for “MaxVol” overrides the “IniVol” setting. For example, if you set “MaxVol” to “–30.0dB” and “IniVol” to “0.0dB”, the volume is automatically set to “–30.0dB” the next time this unit is turned on.

Trigger Out (R-S700 only)

Submenu: Mode

Choices: Power*, Source, Manual

Use this feature to select the functions of the TRIGGER OUT jack of this unit.

Power

Select this setting to send the voltage signals while the selected zone is turned on.

Source

Select this setting to send the voltage signals while the input source is selected.

Manual

Select this setting to send the voltage signals manually.

Note

The settings that are available depend on the mode (Power, Source, or Manual) that is selected.

Power: Zone

Source: Zone and Output level for each input source

Manual: Manual test

Zone

Choices:

All*, Main, Zone 2

Select the zone to apply the setting you selected in “Mode”.

All

The “Mode” setting is applied to the Main zone and Zone 2.

Main

The “Mode” setting is applied to the Main zone only.

Zone 2

The “Mode” setting is applied to Zone 2 only.

OPERATION

ADVANCED

 

 

41 En