CONTROLS AND FUNCTIONS
Remote control
This section describes the function of each button on the remote control used to control this unit or other components made by Yamaha or other manufacturers.
y
indicates buttons that can also be used to control Zone 2. For more information about Zone 2, see pages 45 and 46.
■Common controls
The following buttons can be used no matter which input source is selected.
1Infrared signal transmitter
Sends infrared signals.
2RECEIVER A 
Turns this unit on, or sets it to standby mode.
3ID
Changes the remote control ID (see page 44).
4MAIN/ZONE 2
Switches the zone to be operated by the remote control between the Main Zone and Zone 2 (see page 46).
5SLEEP
Sets the sleep timer (see page 19).
6Input selector buttons 
Selects the input source and changes the control area (see page 47).
7OPTION
Turns the OPTION menu on and off (see page 40).
8SPEAKERS A/B
Turns on and off the set of speakers connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel of this unit when the corresponding button is pressed.
9MUTE 
Mutes the sound output. Press again to restore the sound output to the previous volume level.
0VOLUME +/– ( 
R-S700 only)
Increases or decreases the sound output level.
Note
This does not affect the output level of the REC jacks.
ARETURN
Returns to the previous menu or ends the menu display when using the Option menu (see page 40).
BB / C / D / E / ENTER
Selects and confirms items in the Option menu (see page 40).
CCODE SET/RECEIVER
Used to program the remote control so that it can control your other external components (see page 49).
After using the remote control to control one of your components, this button is used to switch the remote control to receiver mode so that remote control commands will be sent to this unit (see page 48).