SETTING THE OPTION MENU FOR EACH INPUT SOURCE
The Option menu allows you to configure various settings for each input source and recall those settings automatically when an input source is selected. Also, you can view the signal information for certain input sources.
The procedure for setting the Option menu items is described below.
INPUT selector
Input selector buttons
OPTION 
B / C / D / E
ENTER
RETURN 
1Rotate the INPUT selector on the front panel (or press one of the input selector buttons on the remote control) to select the desired input source.
2Press OPTION on the remote control.
Note
If the input source is changed while the Option menu is displayed, the front panel display exits the Option menu and the display for the selected input source is displayed.
To return to the previous menu, press RETURN on the remote control.
Note
If B / C / D / E on the remote control or other buttons do not work after closing the Option menu, rotate the INPUT selector on the front panel (or press one of the input selector buttons on the remote control) to select the current input source again.
Option menu items
The following menu items are provided for each input source.
| Input source | Menu items |
|
|
PHONO, CD, TAPE 1, | Volume, Zone2 Volume*1, Trigger |
LINE | Out*1 |
TUNER | Volume, Zone2 Volume*1, Trigger |
| Out*1, FM Mode, Auto Preset, Clr |
| All Preset |
|
|
SIRIUS | Volume, Zone2 Volume*1, Trigger |
| Out*1, Parental Lock |
DOCK (iPhone/iPod) | Volume, Zone2 Volume*1, Trigger |
| Out*1, Interlock*2 |
DOCK (Bluetooth) | Volume, Zone2 Volume*1, Trigger |
| Out*1, Connect, Disconnect, Pairing |
Notes
*1 “Zone2 Volume” and “Trigger Out” are available on the
*2 “Interlock” is displayed in the Option menu only when using a Wireless System for iPod.
3Press B / C on the remote control to select the desired menu item, and then press
ENTER.4Press B / C / D / E on the remote control to change the settings.y
For certain menu items, you must press ENTER to save the new setting.