PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT

Using a Wireless System for iPod

By connecting a Wireless System for iPod to this unit, you can play songs on your iPhone/iPod and listen to them using a wireless connection.

y

You can use the remote control to control the iPhone/iPod. For more information, see page 36.

Note

When playing an iPhone/iPod using a Wireless System for iPod, playback information is not displayed on the front panel display.

YID-W10

 

transmitter

YID-W10 receiver

 

■Establishing a wireless connection

Once the iPhone/iPod is connected to the YID-W10 transmitter and playback begins, it takes about 5 seconds for audio to be heard. During this time the wireless connection between the YID-W10 transmitter and receiver is established.

The status of the wireless connection between the YID-W10 transmitter and receiver is indicated by the respective indicator.

Status of

YID-W10

YID-W10

transmitter

receiver
Connection

indicator

indicator

 

 

 

 

No connection

Off

Off

 

 

 

Confirming

Green, flashing

Blue, flashing

connection

 

 

 

 

 

Connected

Green, lit

Blue, lit

 

 

 

■Controlling this unit with your iPhone/
iPod

•When playback begins on an iPhone/iPod that is connected to a YID-W10 transmitter, and if the YID-W10 transmitter is within range of the YID-W10 receiver, this unit performs as follows:

–If this unit is already turned on when playback begins: The input source switches to DOCK.

–If this unit is in standby mode when playback begins: This unit turns on and the input source switches to DOCK.

•In the following situations, the wireless connection between the transmitter and receiver is disconnected. After 30 seconds this unit automatically enters standby mode.

–The iPhone/iPod is not operated for about 30–120 seconds after the playback is paused.

–The sleep timer of the iPhone/iPod is activated.

–The iPhone/iPod is disconnected from the YID-W10 transmitter.

–The iPhone/iPod battery level decreases to a level where it cannot provide enough power to the YID-W10 transmitter.

–The YID-W10 transmitter is moved outside of the wireless communication range of the YID-W10 receiver.

–Communication between the YID-W10 transmitter and receiver becomes disrupted due to interference from other wireless LAN devices, cordless telephones, microwave ovens, etc.

y

These features can be disabled by setting “Interlock” to “OFF” in the Option menu (see page 42).

•Adjusting the volume on the iPhone/iPod also adjusts the volume of this unit. The iPhone/iPod can increase the volume to up to 0 dB (or the value set for the “MaxVol” setting in the Option menu). To further increase the volume, adjust the volume using this unit’s VOLUME control or the remote control.

y

•When this unit is turned on or is in standby mode, your iPhone/ iPod can be charged automatically if the YID-W10 transmitter connected to your iPhone/iPod is stationed in the YID-W10 receiver. The MAIN ZONE indicator remains brightly lit when an iPhone/iPod is being charged.

•Refer to the operating instructions of the YID-W10 for more information.

OPERATION

BASIC

 

 

Note

When the iPhone/iPod is used in Zone 2, these features are not available.

37 En