Yamaha Yamaha Mixing Consol, M2500 owner manual A7/G1-A14/G8 section, On switch, AFL switch

Control panel

A7/G1–A14/G8 section

1

0 10

LEVEL

2

ON AFL

A7 / G1

3

010

LEVEL

ON AFL

A8 / G2

010

LEVEL

ON AFL

A9 / G3

010

LEVEL

ON AFL

A10 / G4

010

LEVEL

ON AFL

A11 / G5

010

LEVEL

ON AFL

A12 / G6

010

LEVEL

ON AFL

A13 / G7

010

LEVEL

ON AFL

A14 / G8

These output channels control the signals of AUX buses 7–14 or GROUP buses 1–8. You can use the GROUP/AUX FLIP switch (page 14) to select the sig- nals that will be controlled.

■GROUP/AUX FLIP switch= GROUP ()

The signals of AUX buses 7–14 will be sent to chan- nels A7/G1–A14/G8 respectively, and will be output individually from the AUX/GRP OUT A7/G1–A14/ G8 jacks.

		0	10	0	10
		LEVEL		LEVEL
0	10
	AUX6	ON	AFL	ON	AFL
		A7 / G1		A8 / G2

010

AUX7

010

AUX8

PRE

010

AUX9

010

AUX10

A LEVEL control

This adjusts the output level of AUX/GRP OUT A7/ G1–A14/G8. The “▲” position is nominal level.

B ON switch

This turns AUX/GRP OUT A7/G1–A14/G8 on/off. When the switch is on (), the signals from the A7/ G1–A14/G8 section will be output from the AUX OUT A7/G1–A14/G8 jacks respectively.

C AFL switch

This switch is used to monitor the signal from the AUX/GRP OUT A7/G1–A14/G8 section via the MONITOR OUT/PHONES jacks. If all the input channel PFL switches are off, you can turn on this AFL switch to monitor the corresponding signal of the A7/G1–A14/G8 section from the MONITOR OUT/PHONES jacks. You can use the MASTER PFL switch of the monitor section to switch the monitor signal between pre/post-fader (LEVEL control).

■GROUP/AUX FLIP switch= AUX ()

The signals of GROUP buses 1–8 will be sent to chan- nels A7/G1–A14/G8 respectively, and output individ- ually from the AUX/GRP OUT A7/G1–A14/G8 jacks.

		0	10	0	10
PAN		LEVEL		LEVEL
	C
		ON	AFL	ON	AFL
L	R	A7 / G1		A8 / G2
ODD	EVEN

1-2 ST

3-4 MONO

5-6

7-8 LCR

10 M2500—Owner’s Manual