Yamaha Yamaha Mixing Consol Stereo input channel input/ output jacks, Input a jacks Input jacks

Rear panel

Stereo input channel input/ output jacks

ST CH 4	ST CH 3	ST CH 2	ST CH 1
INPUT	INPUT	INPUT	INPUT A
L/MONO	L/MONO	L/MONO		L

5		R	3
R	R
			R
	PHANTOM
	MASTER		INPUT B
	OFF	ON
			L
			4
			R
READ OWNER’S MANUAL	DC POWER INPUT

C INPUT A jacks E INPUT jacks

These are XLR-3-31 type input jacks (balanced) for stereo input channel 1. Nominal input level is +10 dB to –30 dB. In order to use these jacks, you must set the A/B select switch of stereo input channel 1 to the A position. The pin wiring is as follows.

These are TRS phone input jacks (balanced) for ste- reo input channels 2–4. Nominal input level is

+10 dB to –30 dB. The pin wiring is as follows.

Hot

Cold

Male XLR plug

1 (ground)

3 (cold)

Ground

2 (hot)

D INPUT B jacks

These are RCA phono input jacks (unbalanced) for stereo input channel 1. Nominal input level is +10 dB to –20 dB. In order to use these jacks, you must set the A/B select switch of stereo input channel 1 to the B position. The pin wiring is as follows.

If you wish to input a monaural signal to stereo input channels 2–4, insert a plug only into the L/MONO jack. In this case, the signal that is input to the L/ MONO jack will be sent to both L and R of the stereo input channel.

RCA phono plug Tip (send)

Sleeve (ground)

26 M2500—Owner’s Manual