Printer Installation
Complete Printer Installation
Connect the P120i Printer
The following instructions will guide you through the installation of the P120i printer.
Caution • Limit electrical power supplied to the P120i Printer to 24 VDC. Limit excess current draw to 16 amps or less, using an associated circuit breaker or other such device. Never operate the printer in a location where operator, computer, or printer can get wet. Personal injury could result. The printer must be connected to an earthed electrical power supply and properly protected against electrical surges and grounding faults. The power supply pack can only be replaced by the same product from the manufacturer.
1.Place the printer in a location that allows easy access to all sides. The printer should never be operated while resting on its side or upside down.
2. Remove the yellow CAUTION label from the back of the printer.
3. Ensure that the printer’s power switch in the OFF ( O ) position.
28 | P120i Card Printer User Guide |
