Zebra Technologies TTP 7030 technical manual Fixed Document Mode, Length P37 P38

80

Default Parameter Settings

Print Setup

Figure 21 • Definition of page size

Length	p37	p38
75 mm	<2>	<88>
100 mm	<3>	<32>
112 mm	<3>	<128>
150 mm	<2>	<176>
200 mm	<6>	<64>
250 mm	<7>	<208>
300 mm	<9>	<96>

Parameter 37 equals the whole number portion and Parameter 38 equals the remainder portion of the following equation:

(length in mm × dot density) ÷ 256

For example, for a length of 40 mm and a dot density of 8,

(40 × 8) ÷ 256 = 1 with a remainder of 64.

Therefore:

Paraemeter 37 = 1

Parameter 38 = 64

Top margin

(Distance between cut and print line, 9 mm)

Page length

(minimum 40 mm)

Page width = applicable print window width

TEXT
	Text	TEXT
Text text
	text

Paper transport

direction

SW

Fixed Document Mode

Max fixed document mode page length is depends of the amount of free ram. Make a self-test printout to check how much is available in your printer. (Depends on firmware version).

Page length = Free RAM in bytes −1024 − top margin − bottom margin Paper width

Paper length, top, and bottom margins are in pixel lines. Paper width is in bytes or mm. (1 byte = 1 mm.)

Example • If Free RAM on a TTP 70x0/112 is 114627 bytes, page width is 104 mm = 104 bytes, top margin is 20 mm, and bottom margin 10 mm (20 x 8 =160 and 10 x 8 = 80 pixel lines):

Page length = 114627 − 1024 − 160 − 80 = 852 pixel lines = 106 mm 104

If a too large fixed page is specified the printout will be blank from memory full to the cut.

P1003636-002 TTP 7030™ Technical Manual 10/05/2009