Zebra Technologies TTP 7030 technical manual ESC T n1 Reversed/Inversed Text

36

Programming

Text Commands

ESC T n1		Reversed/Inversed Text
1B 54 n1	Hex
27 84 n1	decimal

Selects normal or reversed print.

n = 0

n = 1

Gives normal print, black on white

Gives reversed print, white on black

Single words, characters, or complete text lines can be reversed.

Note • Reverse text and underline swaps the background with the foreground. This means that the order in which the commands are issued affect the printout if one text overlaps another.

ESC u n1		Underline
1B 75 n1	hex
27 117 n1	decimal

n = 0

n = 1

n = 2

Turns OFF underline

Turns ON a 1 pixel thick underline

Turns ON a 2 pixel thick underline, etc. up to n=7.

Characters, single words, or complete text lines can be underlined.

ESC h n1

1B 68 n1	hex
27 104 n1	decimal

Text Height

Applicable n values are 0 — 15.

n = 1

n = 2

n = 0

Increases the character height to 2 times the basic character height.

Increases the character height to 3 times the basic character height etc.

Resets the character height to the basic character height.

In combination with variable character width <ESC>w<n1>, give highly legible characters depending on the font to which the command has been applied.

Different fonts and heights can be mixed on the same print line.

P1003636-002 TTP 7030™ Technical Manual 10/05/2009