Zebra Technologies TTP 7030 Add-on. Two of five characters are allowed of the add-on

Programming

Barcode Commands

43

ESC	BW	n1	nx		Barcode Write
1B	42 57	n1	nx	Hex
027	066 087	n1	nx	Decimal

Writes data to the bar code field reserved by the <ESC>BS command.

n1	Specifies the field No. Range 0 to 15. Fields can be specified in any order
	but other values than 0 to 15 are ignored.
n2 . . . nx	Specifies bar code data bytes.
	To create a bar code add-on, insert a space character and then the data for
	the add-on. Two of five characters are allowed of the add-on.
NUL	must be placed at the end of the bar code data.

Any invalid bar code character terminates the command, and prints <Invalid barcode> on the printout.

Example • This example will print one barcode with height = 10 mm and moved 10 mm to the right.

<ESC>BS<h00><h00><h32><h00><h00><h0C><h00><h50><h00><h02><h00>«»

<ESC>BW<h00>733104000099<h00>«»

		<RS>«»
ESC B C		Barcode Clear
1B 42 43 n1	hex
27 66 67 n1	decimal

Clears the bar code field reserved by command <ESC>BS.

n

Specifies which bar code field to clear. The range is 0 to 15. The fields may be cleared in any order.

10/05/2009 TTP 7030™ Technical Manual P1003636-002